Shellab SHO1-2 - Manual (Page 7)

Installation
7
Inspect the Shipment
Your satisfaction and safety require a complete understanding of this unit. Read the
instructions thoroughly and be sure all operators are given adequate training before
attempting to put the unit in service.
Inspection
The carrier, when accepting shipment, also accepts responsibility for safe delivery and is
liable for loss or damage. On delivery, inspect for visible exterior damage, note and
describe on the freight bill any damage found, and enter your claim on the form supplied
by the carrier. Inspect for concealed loss or damage on the unit, both interior and
exterior. If necessary, the carrier will arrange for official inspection to substantiate your
claim. Verify that all of the equipment indicated on the packing slip is included with the
unit. Carefully check all packaging before discarding.
Ship kit contents
Each oven unit comes with the following items that need to be installed
(See Figure 1)

A power cord set (depending on the voltage at the country of origin)

Drip tray

Four adjustable feet

Brass locking pin
 The rotator (it is also called the “rotisserie,” part number 9670511) is included
with the 1013 model.
This equipment must be used only for its intended application; any alterations or
modifications will void your warranty.