Shellab SHO1-2 - Manual (Page 5)

Safety and Regulatory Information
5
Technical and Environmental Specifications
Below are the oven’s technical and environmental specifications.
• Class 1 equipment
• Pollution degree 2
• Installation Category II
• Indoor use only in ordinary atmospheres
• Operating ambient temperatures between 15 °C and 35 °C
• Relative humidity between 15 % to 85 %
• Altitude not to exceed 2000 m operating
• G2545A is rated for mains connection to 100–120 VAC or 220–240 VAC,
50/60 Hz, 6A, with main supply voltage fluctuations up to ±10% of the
nominal voltage
Symbols
Warnings in the manual or on the oven must be observed during all phases of operation,
service, and repair of this oven. Failure to comply with these precautions violates safety
standards of design and the intended use of the oven. Sheldon Manufacturing, Inc.
assumes no liability for the customer’s failure to comply with these requirements.
See accompanying instructions for further description or discussion of a control or user
item.
Indicates a hot surface.
Indicates earth (ground) terminal.
Indicates potential shock hazard behind this partition.
Fuses and Battery
The oven uses one 5 × 20 mm fuse, 6.3 A, 250 V, type T. This fuse is located at the rear
of the oven, above the power cord receptacle.
Cleaning
See “Cleaning” on page 14.
Recycling the Product
For recycling, contact your local sales office.