ScanTool STN1100 FRPM - Manual (Page 21)

Family Reference and Programming Manual
STN1100FRPMA www.obdsol.com 21 of 23
11.0 Error Messages
When hardware problems or transmission errors
are encountered, the STN11xx will display an error
message.
OUT OF MEMORY
This error message is displayed when there is not
enough available RAM to complete the requested
operation. For example, this may happen if too many
filters are set.
For a list of other possible error messages and their
descriptions, please refer to the “Error Messages”
section of the ELM327 datasheet.