Reznor Valves Parts Manuals - Manual (Page 31)

Form P-VALVES, P/N 263995R4, Page 31
P/N 86990,
T244
Selectrastat,
Option AG33
Regulators used on DIRECT FIRED
Units are determined by BM Option and
Manifold Size
P/N 89351, MR212D, 1-1/4";
P/N 91071, MR212E, 2";
P/N 163143, MR212G, 3"
Temperature Selectors (see table, page 30, for option application)
P/N 86988, TD114 U.S. Models, Range 55-90°F (selector with
box, P/N 156085);
P/N 101165, TD114, Canadian Models, Range 50-75°F;
P/N 87107, TD114A, Range 80-130°F;
P/N 123943, TD114B, Range 120-140°F
P/N 159285, TD114B, Range 120-160°F
P/N 204455, TD DFM14
P/N 204451, TD DFM44
P/N 123916,
M611-R66, 3/4";
P/N 87001,
M611-R88, 1"
Temperature Sensor (see table, page 30, for option
application) :
P/N 90324, TS114, Range 55-90°F;
P/N 87106, TS114-A, Range 80-130°F;
P/N 123944, TS114B, Range 80-140°F;
P/N 204452, TS394-2B-4;
P/N 204453, TS194Q;
P/N 119617, TS144E, Range 20-60°F and 60-120°F;
P/N 194160, TS144C, Range 20-60°F and 80-140°F;
P/N 87041, TS144, Range 40-80°F and 80-140°F;
P/N 133228 TS194 for Paint Booth Application
IMPORTANT NOTES: When replacing a temperature sensor on a Maxitrol
MV-9 system (Option AG33), check the Model No. on the sensor. P/N 119617 or
194160 is used on units manufactured beginning 2/92; P/N 87041 is used on units
manufactured prior to 2/92.
Sensors are not interchangeable; the sensor must match the amplifier
shown on page 30.
P/N 133230,
#TD294E-609-0818 ,
Dual Temperature
Selector for Paint
Booth Application,
Option AG36
Maxitrol Components for Electronic Modulation - Direct-Fired Equipment Model Series ADF,
DV, and RDF with Options AG30, AG31, AG32, AG35, AG33, AG36, AG37, AG47, AG48, AG51
(cont'd)
Mixing Tube for temperature
sensors, P/N 90323, MTI-12