Reznor VP Series Option - Installation - Combustion Air Kits - Manual (Page 5)

5
Any unused components supplied with the fresh
air Inlet conversion kits need to be disposed of
accordingly as not all parts supplied are required.
Section 4
VCS/VCT Hose Connection
Connect the flexible hose. Using a No. 2 flat
screwdriver tighten the hose clamp screw to make a
secure connection. Re-commission the burner to
ensure correct operation.
For details of fresh air ductwork to the exterior
please refer to the appropriate main instruction
manual for the heater being converted
VCS/VCT Models
Air Inlet plate
already fitted.