Reznor VP Series Option - Installation - Combustion Air Kits - Manual (Page 4)

4
Any unused components supplied with the fresh
air Inlet conversion kits need to be disposed of
accordingly as not all parts supplied are required.
Section 3
VPT Hose Connection
Connect the flexible hose. Using a No. 2 flat
screwdriver tighten the hose clamp screw to make a
secure connection. Re-commission the burner to
ensure correct operation.
For details of fresh air ductwork to the exterior
please refer to the appropriate instruction manual
for the heater being converted.
VPT Models
Air Inlet plate
already fitted.