RED 4K BROADCAST MODULE - Manual (Page 18)

COPYRIGHT © 2014 RED.COM, INC
RED 4K BROADCAST MODULE OPERATION GUIDE
955-0072, REV-D | 18
All RED products are designed for rugged durability, but precision instruments demand proper care. Follow the
instructions in this chapter to clean, maintain, and store the 4K Broadcast Module.
WARNING: DO NOT rinse or immerse the 4K Broadcast Module in water. Keep dry at all times.
WARNING: DO NOT use soaps, detergents, ammonia, acetone, alkaline cleaners, abrasive cleaning compounds,
or solvents. These substances may damage lens coatings and electronic circuitry.
WARNING: DO NOT attempt to modify, dismantle, or open your 4K Broadcast Module as doing so may expose
you to electric shock and serious injury. There are no user-serviceable parts inside. Alteration or repairs made
to the 4K Broadcast Module, except by a RED authorized service facility, voids all warranties.
CLEAN 4K BRoAdCAst ModuLE EXtERIoR suRFACEs
Use a gas duster to clean around the recesses on the exterior of the 4K Broadcast Module.
Clean with a damp, lint-free cloth. When cleaning your 4K Broadcast Module, remember that the device is
not waterproof and moisture can damage electronic circuitry.
stoRE 4K BRoAdCAst ModuLE
WARNING: DO NOT store the 4K Broadcast Module in any place with extreme temperatures, direct sunlight, high
humidity, severe vibration, or strong magnetic fields.
WAtER dAMAGE
If your device has come in contact with water or you suspect water damage, contact your Bomb Squad
representative immediately.
WARNING: DO NOT attempt to power any device that may have water damage.
WARNING: DO NOT place the device in a container of rice, silica gel, or desiccant packets in an attempt to dry
the device.
04
4K BROADCAST MODUlE
MAINTENANCE