Remove the 4k broadcast module, Red 4k broadcast module operation guide – RED 4K BROADCAST MODULE User Manual

Page 11

Text mode
Original mode

RED 4K BROADCAST MODULE OPERATION GUIDE

955-0072, REV-D | 11

5. Apply pressure and use a T20 Torx driver to turn the lock on the bottom of the adaptor module clockwise

into the Lock position.

The 4K Broadcast Module is secured.

rEMoVE THE 4K BroAdcAST ModuLE

rEQuIrEd TooL: T20 Torx

driver

1. Turn off the BRAIN.
2. Use a T20 Torx driver to turn the lock on the adaptor module counter-clockwise to the unlock position.
3. Rotate the 4K Broadcast Module upwards and down to disengage the lip at the top of the module from the

adaptor module.

4. Remove the 4K Broadcast Module from the adaptor module.

Lock In Module

4K Broadcast Module

Installed