Enable a test pattern, Red 4k broadcast module operation guide – RED 4K BROADCAST MODULE User Manual

Page 16

RED 4K BROADCAST MODULE OPERATION GUIDE

955-0072, REV-D | 16

6. Set up the genlock source in the camera:

A. Go to Menu > Settings > Setup > GPIo/Sync.
B. Select rear Module from the Genlock Source drop-down menu.

The GEN indicator in the Lower Status Row illuminates green.

ENABLE A TEST PATTErN

1. Go to Menu > Settings > display > 4K Broadcast.
2. Select Test Pattern from the right output drop-down menu.

The SDI ports output SMPTE color bars.

3. To switch back to the video feed, select Video from the right output drop-down menu.