Mixing carbon fiber and aluminum components, Summary of carbon fiber restrictions, Additional resources – RED DSMC MEDIA User Manual
Page 8: Red dsmc media operation guide
COPYRIGHT © 2014 RED.COM, INC
RED DSMC MEDIA OPERATION GUIDE
955-0047, REV-F | 8
MIXING CARBON FIBER AND ALUMINUM COMPONENTS
The structural mounting points for the carbon fiber media modules are optimized for the carbon fiber DSMC
BRAIN, whereas the structural mounting points for the standard aluminum side SSD modules are optimized for
use with the standard aluminum DSMC BRAIN.
Using a carbon fiber media module with an aluminum DSMC BRAIN or using an aluminum side SSD module with
a carbon fiber DSMC BRAIN may lead to an unstable connection between the BRAIN and the module, which
could affect data integrity.
WARNING: Damage to the DSMC BRAIN, side SSD module, or other components of the DSMC system caused
by mixing carbon fiber components with non-carbon-fiber components is not covered under warranty, and may
void the warranty for both the BRAIN and the side SSD module.
SUMMARY OF CARBON FIBER RESTRICTIONS
DO NOT attach any of the following side SSD modules to a carbon DSMC BRAIN:
RED MINI-MAG Side SSD Module
DSMC 1.8" SSD Side Module
DSMC 1.8" SSD Side Module (DRAGON)
DO NOT attach the following side SSD modules to a standard aluminum DSMC:
Carbon Fiber RED MINI-MAG Side SSD Module
Carbon Fiber DSMC 1.8" SSD Side Module (DRAGON)
ADDITIONAL RESOURCES
The following resources offer additional information about RED, the DSMC system, and the RED community:
: Check the
for the latest information about RED products.
: RED offers
about RED cameras, post-production, and digital
cinematography.
: Go to the
to download the latest firmware, operation guides,
and post-production software.
AQs, or to file a support ticket.
d-party forum.