RED DSMC MEDIA - Manual (Page 16)

COPYRIGHT © 2014 RED.COM, INC
RED DSMC MEDIA OPERATION GUIDE
955-0047, REV-F | 16
SSD MODULES
You can mount the REDMAG 1.8" SSD to the following modules:
DSMC 1.8" SSD Side Module
DSMC 1.8" SSD Side Module (DRAGON)
Carbon Fiber DSMC 1.8" SSD Side Module (DRAGON)
REAR SSD MODULE
DSMC 1.8" SSD SIDE MODULES
RED offers the following DSMC 1.8" SSD Side Modules:
DSMC 1.8" SSD Side Module: Mounts to any standard aluminum DSMC BRAIN.
DSMC 1.8" SSD Side Module (DRAGON): Mounts to a DSMC with a RED DRAGON sensor, and is only available
with a DSMC with a RED DRAGON sensor.
Carbon Fiber DSMC 1.8" SSD Side Module (DRAGON): Mounts to a carbon fiber DSMC BRAIN, and is only avail-
able with a carbon fiber DSMC BRAIN.
Each DSMC 1.8" SSD Side Module attaches to the DSMC so that you can mount a REDMAG 1.8" SSD to your
camera.
Each DSMC 1.8" SSD Side Module has the same EVF/LCD LEMO connector, user keys, REC button, and LED
as the RED MINI-MAG Side SSD Module.
NOTE: The two (2) screws under the SSD slot on the standard aluminum side SSD modules secure an internal
bracket that provides structural support. DO NOT loosen these screws. Loosening these screws DOES NOT
provide extra clearance for the SSD.
WARNING: The red metal heat sink under the SSD slot on the Carbon Fiber DSMC 1.8" SSD Side Module (DRAGON)
may get hot during long-term operation.
WARNING: The DSMC 1.8" SSD Side Module is NOT HOT SWAPPABLE, meaning you cannot remove or install
the module while the camera is powered on. Before installing or removing the module you MUST power down
the camera. Failure to do so may result in damage to the module or DSMC that will not be covered under war-
ranty.
DSMC 1.8" SSD Side Module
(Rear and Front)