Upgrade ssd firmware, Verify current ssd firmware, Red dsmc media operation guide – RED DSMC MEDIA User Manual

Page 46

RED DSMC MEDIA OPERATION GUIDE

955-0047, REV-F | 46

Your RED SSD functionality may be upgraded by installing the latest firmware. Currently, RED only offers a firm-

ware upgrade for the REDMAG 1.8" SSD (512GB).
Make a habit of frequently visiting

www.red.com/downloads

to check for new versions of SSD firmware, up-

dated operation guides, and post-production software.

VERIFY CURRENT SSD FIRMWARE

To see the firmware version that is currently installed on your SSD, go to Menu > Settings > Maintenance > System

Status > Media Info. The current firmware (Media Firmware Revision) version displays.
This is the complete list of information that displays on the Media Info screen:

Media Status: Active media, module type.

Media Name: Storage capacity, SSD type, and version/revision of the SSD.

Serial Number: Serial number of the SSD.

Media Firmware Revision: Firmware version on the SSD.

Media Size: Total capacity on the SSD.

Media Space Available for Recording: Total capacity left on the SSD that can be recorded to.

Maximum Data Rate: The maximum data rate when writing files to the SSD.

NOTE: When an SSD is not attached, the Media Info tab displays the following: “No Active Media Found”.

UPGRADE SSD

FIRMWARE