RED DSMC MEDIA - Manual (Page 45)

RED DSMC MEDIA OPERATION GUIDE
COPYRIGHT © 2014 RED.COM, INC 955-0047, REV-F | 45
OFFLOAD DATA FROM MEDIA TO YOUR COMPUTER
1. Connect the RED MINI-MAG or REDMAG 1.8" SSD to your computer.
2. Copy the complete .RDM folder on the SSD to the archive storage media. This copies all the media and
metadata files.
NOTE: You do not need to copy the log, magazine profile, or presets files, but you can if you choose.
3. Properly eject/unmount the RED MINI-MAG from the computer before physically removing the RED MINI-MAG
from the RED STATION RED MINI-MAG or turning off the RED STATION RED MINI-MAG.
RED WATCHDOG
On Mac computers with REDCINE-X PRO installed, RED Watchdog mounts the SSD as read-only by default,
which means that you are unable to write files (including firmware upgrade files) to the SSD. RED Watchdog is
identified by the RED Coin icon located on the right side of the Mac Menu Bar.
To enable you to read/write to the SSD on a Mac, follow the instructions below:
1. Click the RED Watchdog icon.
2. Select Preferences.
3. Select Read-Write from the Mount RED Mags drop-down menu.