PS Engineering PAR200 - Manual (Page 19)

PS Engineering Inc. ®
PAR200 Audio Selector Panel, COM radio Controller and Intercom System
Installation and Operator’s Manual
200-228-0000 Page 2-12 Rev. 4, Dec. 2013
Figure #3
a. Install one long screw through the top lid, near the front edge on the power
supply board side, and add then add the nylon spacer from § 2.8.
Figure #4
4. Place the lid back on the unit aligning holes.
5. Install qty. 3 more long thread screws into the lid.