PRG Mbox Director User Manual v3.9 - Manual (Page 90)

84 MBOX ® DIRECTOR USER MANUAL
Controlling an External Projector (Serial-Over-Ethernet)
The Profile setting available in the Add Fixture and Change Configuration windows allows the Mbox Director output to
be changed from the default Mbox (.Mbox with Layers) configuration to Serial-Over-Ethernet. The Serial-Over-
Ethernet feature allows Mbox Director to control any external projector which will accept Serial-Over-Ethernet
protocol.
To configure Serial-Over-Ethernet control:
Step 1. Open Add Fixture or Change Configuration window. (Refer to "Adding Fixtures" on page 12 for more
information.)
Step 2. Click on Profile setting at top-right of window. Select Serial-Over-Ethernet option. Window will now display
Serial-Over-Ethernet options.
Step 3. Enter custom name, IP address, and other parameters specific to the device you are controlling. (The IP
address entered here must match the IP address of the projector device.)
Profile Setting
(Mbox, Serial-Over-
Ethernet)
Click to edit field