PRG Mbox Director User Manual v3.9 - Manual (Page 73)

MBOX ® DIRECTOR USER MANUAL 67
+ MIDI Control Change: CC - Allows for an arbitrary control change command. When selected, CC will be entered
into the trigger column. Using the keyboard, enter the desired control change number after the CC prefix. Director
supports entries from 0-124. For example, "CC 52."
+ MIDI Note On: NT - Allows for an arbitrary note command. When selected, NT will be entered into the trigger
column. Using the keyboard, enter the desired note number after the NT prefix. Director supports entries from 0-
127. For example, "NT 101."
+ No Trigger - Clears the scene’s trigger field.
Note: Some consoles support cue format: ####.###. In this case, Director will ignore the third digit after the decimal.
Training Video: Mbox Media Server Training Video Chapter 15: Scene Timing
Setting MIDI Preferences
When receiving MIDI timecode from an external source, the preferences are configured at the MIDI tab.
Note: To specify external MIDI operation, first select MIDI - MTC at the General preferences tab:
At MIDI preferences tab, setup external MIDI operation as follows:
+ MIDI Enabled - Allows the MIDI feature to be enabled or disabled. (MIDI is enabled by default, but can be
disabled in the event of an incompatibility issue by unchecking the box.)