Curtis Mathes BLU-RAY DISC CMMBX72 - Manual (Page 27)

Connections
Connecting to an audio system (5.1 channel amplifier)
1. Using the audio cables, connect the 5.1 ANALOG AUDIO OUT (Front R, Back L, CENTER, SUBWOOFER, Surround L,
Surround R) terminals on the rear of the Blu-ray disc player to the 5.1 Channel ANALOG AUDIO IN (Front R, Front L,
CENTER, SUBWOOFER, Surround L, Surround R) terminal of your Amplifier.
2. Using the video signal cable (s), connect the HDMI, COMPONENT, S-VIDEO or VIDEO OUT terminals on the rear
of the Blu-ray disc player to HDMI, COMPONENT, S-VIDEO or VIDEO IN terminal of your TV as described.
3. Turn on the Blu-ray disc player, TV and Amplifier.
Press the input select button of the Amplifier to select the external input in order to hear sound from the
Blu-ray disc player. Refer to your Amplifier's user manual to set the Amplifier's audio input.
[NOTE]:
Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage to the
speakers and your ears.
Please set the audio in the menu screen according to the Amplifier.
The position of terminals may vary depending on the Amplifier. Please refer to the use's manual of your
Amplifier.
The front left and right outputs on your player and 5.1 channel amplifier must be connected to hear disc menu
audio from certain Blu-ray discs.
・
・
・
・
5.1 Channel Amplifier
25