Curtis Mathes BLU-RAY DISC CMMBX72 - Manual (Page 24)

Connections
Connecting to a TV ( S-Video)
Connecting to your TV using an S-Video cable.
You will enjoy high quality images. S-video separates the picture element into black and white (Y) and color (C)
signals to present clearer images than regular video input mode.
1. Using an S-video cable (not included),connect the S-VIDEO OUT terminal on the rear of the Blu-ray disc player
to the S-VIDEO IN terminals of your TV.
2. Using the audio cables , connect the AUDIO(red and white)OUT terminals on the rear of the
Blu-ray disc player to the AUDIO (red and white) IN terminals of your TV. Turn on the Blu-ray disc player and TV.
3. Press the input selector on your TV remote control until the S-VIDEO signal from the Blu-ray disc player
appears on your TV screen.
If you have set the remote control to properly operate with your TV, press the TV INPUT SEL. button on the
remote control and select S-VIDEO as the external source of the TV.
[NOTE]:
The S-VIDEO source is always output in 480i resolution regardless of the set resolution in the SETUP menu.
(not included)
・
S-Video Cable
(not included)
TV
L R
Audio Cable
(not included)
S-VIDEO IN
R
W
R W
AUDIO IN
R W
white red
22