Connections – Curtis Mathes BLU-RAY DISC CMMBX72 User Manual
Page 25
Connections
Connecting to a TV (Video)
1. Using video / audio cables, connect the VIDEO (yellow) / AUDIO (red and white) OUT terminals on the rear of
the Blu-ray disc player to the VIDEO(yellow)/AUDIO(red and white)IN terminals of your TV.
2. Turn on the Blu-ray disc player and TV.
3. Press the input selector on your TV remote control until the Video signal from the Blu-ray disc player appears
on the TV screen.
If you have set the remote control to properly operate with your TV, press the TV INPUT SEL. button on the
remote control and select VIDEO as the external source of the TV.
[NOTE]:
Noise may be generated if the audio cable placed too close to the power cable.
If you want to connect to an Amplifier, please refer to the Amplifier connection Pages.
The number and position of terminals may vary depending on your TV set. Please refer to the use's manual of
your TV.
If there is one audio input terminal on the TV, connect it to the [AUDIO OUT] [left] (white) terminal of the
Blu-ray disc player.
The VIDEO source is always output in 480i resolution regardless of the set resolution in the SETUP menu.
・
・
・
・
・
TV
L
R
VIDEO IN
Y
R
W
R
AUDIO IN
Y
G
W
yellow
red
white
Y
W
23