Philips FW48-37 - Manual (Page 20)

CLOCK SETTING TIMER SETTING
I
a:
Setting the clock Setting the Tinier
The clock uses the 12 hour system, e.g. 1 PM or 12 AM.
1 Press CLOCK.
— " <' starts flashing.
2 Set the hour with PRESET T or A.
3 Set the minute with TONING l^^or^^-l .
4 Press CLOCK again to store the setting.
The clock starts running.
Note:
- When a power interruption occurs, the clock settings
are erased.
• The system can switch on to TUNER or CD mode
automatically at a preset time. It can serve as an alarm
to wake you up. After half an hour from the preset time,
the system will return to the standby mode.
• Before setting the timer, make sure the clock is set
correctly.
• The timer works only once for each setting.
• The volume of the timer will be atthe last setting
before the set is switched to standby mode.
Timer Setting
1 Press TIMER SET.
— The TIMER flag flashes.
2 Press PRESET A to select the desired sound source.
— The display will switch as follows:
TUNER-CD-TUNER...
3 Press TIMER SET to confirm your selection.
— The display will show W !3:Q0 n.\' and
“ lS:Ou Af.t” flashes.
4 Press PRESET T or A to set the hour for the timer to
start.
5 Press TUNING l■♦4or►►l to set the minutes for the
timer to start.
6 Press TIMER SET to store the start time.
— The TIMER is now set.
— The TIMER flag remains lit
To stop the TIMER
• Press TIMER ON'OFF on the set.
— The TIMER is now off.
To start the TIMER again
• Press TIMER ON*OFF on the set
— The display will show the last set start time of the
TIMER and its flag.
— The TIMER flag remains lit
Notes:
1. If the source selected is TUNER, the last tuned
frequency will be switched on.
2. If the source selected is CD. playback will begin with
the first track of the last selected disc. If the CD trays
are empty, the TUNER source will be selected instead.
20