Inserting the batteries into the remote control, Am antenna connection, B) fm wire antenna connection – Philips FW48-37 User Manual

Page 10: Outdoor antenna, C) speaker connections, Preparations

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Inserting the batteries into the remote

control

• Insert the batteries (TypeR6orAA) into the remote

control as shown inside the battery compartment

PREPARATIONS

To avoid damage from possible battery leakage,

remove dead batteries or batteries that will not be used

for a long time. For replacement use type R6 or AA

batteries.

AM Antenna Connection

Connect the supplied loop antenna to the AM antenna

terminal. Adjust the position of the AM loop antenna for the

best reception.

(B) FM Wire Antenna Connection

Connect the supplied FM wire antenna to the FM 300 £i

terminal. Adjust the position of the FM antenna for the best

reception.

Outdoor Antenna

For better FM stereo reception connect an outdoor FM

antenna to the FM ANTENNA 300 ii terminal using a

300 il dipole wire.

(c) Speaker Connections

* •

• Connect the right speaker to terminal R, with the red

wire to + and the black wire to —.

• Connect the left speaker to terminal L, with the red

wire to + and the black wire to —.

• Clip the stripped portion of the speaker ivire as shovm.