Philips FW48-37 - Manual (Page 16)

CASSEHE DECK
S’
1
Loading a cassette Tape Playback
Press ST0P»0PEN.
The cassette compartment door opens.
Load the cassette with the open side downward and
the full spool to the left.
Close the cassette compartment door.
1 Press SOURCE (or TAPE on the remote control) to
select TAPE.
2 Load the cassette into the desired cassette deck.
3 Press PLAY ► to start playback.
4 Press STOP»OPEN to end playback.
Fast Fotward/Rewinding
1 You can rewind or fast forward the cassette by
pressing « or respectively.
2 Press STOP»OPEN to stop fast fonvarding or
rewinding.
Note:
It is possible to fast forward or rewind a cassette when
the set is in another source made (e.g. TUNER, CD or
VIDEO/AUX model.
Continuous playback of two cassettes
1 Press SOURCE to select TAPE.
2 Load the cassettes in tape deck 1 and tape deck 2.
3 Press PLAY ►on tape deck 2.
4 Press PAUSE on tape deck 1.
5 Press PLAY ►on tape deck!
-* Playback will begin with tape deck 2 and will
continue with tape deck 1 when tape deck 2 ends
6 Press STOP*OPEN if you want to stop playback before
the end of the cassette in tape deck 1 or tape deck 2.
Recording (TAPE DECK 1)
1 Press SOURCE to select TUNER, CD or VIDEO/AUX.
2 Load a blank cassette into tape deck 1.
3 Start playback of the TUNER, CD or VIDEO/AUX source.
Press RECORD on tape deck 1 to start recording.
— The RECORD flag starts flashing.
4 Press STOP*OPEN on tape deck 1 to stop recording.
Note:
During recording, it is not possible to listen to another
sound source.
16