Philips DCC951-17S - Manual (Page 8)

DCC BASICS PLAYBACK
m
3
«a
5!'
3"
Playback of a cassette is similar to operating a CD-player.
m Switch the unit on with the POWER STANDBY/OFF key.
The unit checks if a cassette is loaded.
If no cassette is loaded, the display panel shows:
HO CÑ55EI It
Press the OPEN/CLOSE key to open the tray and insert a
cassette.
Close the tray by pressing
OPEN/CLOSE again or by pushing the tray.
The display panel shows:
The unit now reads the tape. This procedure will take maximum
5 seconds.
RfcHDING
If the unit finds a DCC album, the complete track title will once scroll on the display.
After that the shortened title will appear, e.g.:
(max. 12 characters)
see Q
MY DESTINY
If the unit finds a (user-recorded) DCC, the time is displayed.
The display panel shows for instance:
The track number may not be known as this is
recorded at the start of a track.
see □ TOT me
23€5 SlOP
If the unit finds a conventional musicassette, the
display shows the counter mode:
ooisy B
S3E Q
0 0 0 0 S I O P
The display settings can be changed with the TIME/TEXT key.
see also: DISPLAY
Press the PLAY ► key to start playback.
Playback will start from the present position of the tape.
The display will show for instance:
The play indication ► on the display lights up.
in Press the STOP ■ key to stop playback.
sros Q TOT
153 FLRY
Searching for next or previous tracks can be done by shortly pressing the
The play indicator ◄ or ► on the display will start blinking.
The display shows e.g.:
keys.
soe D TOT nuE —^ ^
10=53 Tii 5
When the keys are pressed > 0.5 sec., the deck
starts (re)winding until you release the key.
see also: PLAYBACK FUNCTIONS
~ y
Q TOT TCUS —^
1053 'TC
h
-2
NOTES:
see page 7.