Cassette types, Play, Record – Philips DCC951-17S User Manual

Page 6: Dcc album, Dual album format, Musicassette

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

CASSETTE TYPES

PLAY

RECORD

DCC ALBUM

• continuous play
• continuous tracknumbering

• LEAD IN: automatic search to start of

first track; negative time will be

displayed.

When using a DCC album the following
information is available:

• album-info: title, artist
• tracktitle-list
• song lyrics (if present on cassette)
• tracknumbers
• track time, absolute time, total

remaining time.

• direct track search
• title search

This information is continuously

repeated in the music track and can be
retrieved within a short time.

PLAY

RECORD

DCC

When using a DCC the following
information is available:

• absolute time
• track number at start of track
• track time
• remaining time on current side
• sequential track search

OPTIOFML

• title at start of track

ic- see TITLE PROGRAMMING

• renumber

ICS' see EDIT

NOTE:
If a recording is started in a blank area,

the player is not able to write
tracknumbers and absolute time on the
tape. The renumber action is then not

possible.

3 formats can bé recorded:

1. MC like format

L£AO

A w

• automatic autoreverse at end of side
• this autoreverse action may occur in

the middle of a track.

2. Single album format

• continuous play
• continuous tracknumbering
• autoreverse between tracks
• continue B

see EDIT

3. Dual album format

HAD

A W

—

J-----i

tJ "' u '

• fast wind to new side
• independent tracknumbering per side

see EDIT

NOTE:

A recording started on side A will
automatically continue on side B, if
limited recording space (< 1 min.) is
available on side A. In order to reduce the

loss of recorded information due the

trailer tape, the DCC recorder switches to
side B slightly before side A is completely
full. During playback this may result in a
silent 'gap'. It is advised to activate

'RENUMBER' after finalising the
recording session (see: 'EDIT,
RENUMBER').
'RENUMBER' guarantees correct track
numbering and direct change to side B
during playback.

PLAY

RECORD

When using a conventional musicassette
the following information is available:

• counter setting
• estimated absolute time
• AMS (search of start if tracks are

separated with >3 sec. silence.

MUSICASSETTE