Philips DCC951-17S - Manual (Page 12)

DETAILED FUNCTION DESCRIPTION
m
3
*2.
S’
INSTALLATION
PRESETS
With the PRESETS function you can control the default settings of the DCC-recorder.
• Press the PRESETS key to enter the edit rnode. _ _ _
The display shows SELECT PLAT - REC SELECT - RECORD - EDIT, indicating that you can select one of these keys.
• After pressing the respective key the following default settings can be adjusted.
PLAY>-
- fiUTD PLfiV: playback will
always be started
automatically as soon as the
tray has been closed.
- flUTO STOP: playback will
not be started automatically.
Selection can be made with
the
keys.
Press PRESETS again to
store the selected values.
REC SELECT/PAUSEll
CD, TUNER, AUX1, AUX2:
selection of recording
source
DIG, OPT, ANArselecting
the input: digital, optical or
analog
The recording source can be
selected with the REC
SELECT/PAUSEII key
The input can be selected
with the
keys.
Press PRESETS again to
store the selected values.
RECORD«
CD SYNCHRO OH: CD
synchro dubbing will be
started automatically when
you are recording from a CD.
{only if the correct ESI BUS
connections are made.)
CD SY'HCHRO OFF: CD
synchro dubbing will not be
started automatically.
• Selection can be made with
the keys.
• Press PRESETS again to
store the selected values.
EDIT
- fiUTO EDIT ON: the DCC
player will write new track
nrs on the tape when 3 sec.
silence (<-60dB) is detected
during recording from analog
or micro input.
When a digital source is con­
nected (via digital sockets)
this function is always auto­
matically set to RUT0 ED IT
ON.
-RUlO EDIT OFF: the
DCC player will not perform
automatic track increment.
• Selection can be made with
the keys.
• Press PRESETS again to
store the selected values.
EXAMPLE: Changing the input source for CD.
Press PRESETS -* * Press REC SELECT PAUSE — Display shows current setting CD DIGITfiL IN -* Select the input e.g.
CD OPTICAL IN with the
keys — Press PRESETS again to store the adjustment. The display shows PRESETS
STORED.
12