Cleveland Range KCL-25-T - Manual (Page 24)

21
SAFETY THERMOSTAT:
✘
Probe
removed
partially
✘
Probe
removed
completely
✘
Thermostat
electrically
bypassed
✔
Probe
fully
inserted
in tube
Wiring is properly
connected
1 2 3
Incorrect
Installations
1 Safety thermostat
probe is not
completely
inserted into
tubing.
2 Safety thermostat
probe is removed
from tubing.
3 Safety thermostat
electrical
connection is
bypassed.
Low Water Level Probe:
Probe bypassed by
running (A) an
additional wire
Probe properly
attached
260º - 270º
MAXIMUM
KETTLE
TEMPERATURE
265º
✔
If maximum temperature is not
in this range (on empty kettle),
refer to the CALIBRATING
PROCEDURE on page #23.
Operating
Thermostat:
✔
✘
Probe bypassed by
(B) grounding the
connecting wire
✘
(A)
(B)
SAFETY INSPECTION CHECKLIST -
TILTING MODELS (pg. 2 of 2)