beautypg.com

Things you should know troubleshooting, English-9 – Coleman 5071 Series User Manual

Page 10

background image

English-9

■ Make sure fireplace is cool.

■ Remove both propane cylinders from regulator

and replace protective caps on cylinders
(Fig. 38).

To Clean

■ Wipe granite surfaces clean with soft cloth and

mild dish detergent. Do not use abrasives.

Fig. 38

To Store

DANGER

• EXPLOSION - FIRE HAZARD

• Never store propane near high heat, open

flames, pilot lights, direct sunlight, other
ignition sources or where temperatures
exceed 120 degrees F (49°C).

• The cylinder must be disconnected when the

gas fireplace is in storage.

• Do not store a spare LP-gas cylinder under or

near this appliance. Failure to follow the above
instructions exactly may result in fire causing
death or serious injury.

Fig. 39

■ Place the Inner Granite Surface over the

firebowl (Fig. 39).

Fig. 40

■ Place the Cover over the fireplace and secure

with the hook and latch straps (Fig. 40).

1. It is unsafe and illegal in some places to store or
use propane cylinders of greater than 1.14 kg (2.5
lbs) water capacity (approximately 1 lb. propane) in
occupied enclosures.
2. For repair service call one of the numbers on
the front cover for location of your nearest
Coleman Service Center. If a service center is not
conveniently located, attach to the product a tag
that includes your name, address, daytime
telephone number and description of the problem.
Carefully package the product and send either by
courier or insured mail with shipping and insurance
prepaid to:

The Coleman Company, Inc.
3600 North Hydraulic
Wichita, KS 67219

3. If not completely satisfied with the performance
of this product, please call 1-800-835-3278 in the
US or 1 800 387-6161 in Canada.

www.coleman.com

Things You Should Know

Troubleshooting

Symptom: Burner will not light using the

INSTASTART™ ignition system.

Problem: Battery is dead.
Solution: Replace with a fresh alkaline

AA battery. You may also light the burner using
a match (see page 8).

Symptom: Burner will not light or flame self-

extinguished.

Problem: Fuel bottle is empty.
Solution: If using 16.4 oz. disposable

propane cylinders, replace with new
cylinders. If using a refillable 20# cylinder,
refill the cylinder.

Symptom: Burner will not light using the

INSTASTART™ ignition system.

Problem: Excess unburned fuel prevents ignition.
Solution: Turn off fuel and allow excess fuel to

dissipate for five minutes. Review lighting
procedure. You may also light the burner using
a match (see page 8).

Symptom: Burner will not light using the

INSTASTART™ ignition system.

Problem: Ignition wires or electrode are

disconnected or damaged.

Solution: Check connections and replace

damaged items.

Symptom: Burner will not light using the

INSTASTART™ ignition system.

Problem: Igniter cage opening is obstructed.
Solution: Clear cage of glass and rock, allow

excess fuel to dissipate before relighting (see
page 6).