Coleman GALILEO 9276B204 - Manual

Connect Frame to Tent
– Insert one pin into the end of main tent
pole at tent corner. (illus. 3, illus. 4)
– Go to opposite end of pole and gradually
apply pressure to the pole forming an arch
until you are able to insert the pin into the
pole end. (works best with two people)
– Repeat for second pole.
– Insert pin into the end of side pole, go to
opposite end of pole and apply pressure
until you arch the pole and can insert the
pin into the pole. (illus. 3, illus. 4)
GALILEO ™ 14’x10’
1 Layout & Positioning
of Tent, Pole Assembly
– Layout and position tent with doors
facing desired directions. (illus. 1)
– Unzip doors.
– Stake down tent, using the rings on the
stake loops. Keep the floor taut. (illus. 2)
– Assemble frame poles by interlocking
shock-corded poles. (three poles)
– Insert the longer black poles into pole
sleeves as shown below. They will
curve and come out on the same side
that they started. The shorter grey
side pole inserts into sleeves running
side to side. (illus. 1)
2
When You Are Ready
To Set Up Your Tent
– Select a level campsite clear of
rocks, branches and other hard
or sharp objects.
– Do not set up your tent under trees.
– For best results in windy conditions,
position the end of tent into the wind.
(4) Rainfly Poles
Front door
Grey side pole
Assembled poles
inserted through
pole sleeves
Instructions apply to Part Number 9276B141
illus. 1
illus. 2
Tent stake through ring on stake loop
illus. 4
Tent frame
set-up
Part No. 9276B202
Part No. 9276B203
Part No. 9276B204
(2) Main Tent
Poles (Black)
(1) Side Pole
(Grey)
illus. 3
Insert pin into pole end
Rainfly Part No. 9276B205
Grommets for
rainfly poles
POLE ASSEMBLY PARTS