Casio KL-C500 - Manual (Page 40)

E-39
Part 13 Reference
This section contains information about the label printer that you can use as
reference when you need it.
Cleaning the Printer Head and Roller
A dirty printer head and roller can result in poor printing quality. If you have
problems with print quality, use the following procedure to clean the printer head
and roller.
To clean the printer head and roller
1. Make sure the label printer is turned off.
2. Press the tape cartridge compartment cover release and open the compart-
ment cover.
3. Remove the tape cartridge.
4. Use a cotton swab dipped in alcohol to clean the printer head and roller as
shown in the illustration.
5. Replace the tape cartridge and close the compartment cover.
Initial Settings
The following are the initial settings of the label printer whenever you turn it
power on or reset the unit.
Item Power On Reset
Display Cleared* Cleared
Memory Retained Cleared
ab(CAPS OFF)/AB(CAPS ON) Retained ab
* Pressing SET when the message “PRESS [SET] TO RECALL” appears on the display,
recalls the text that was on the screen when you last turned off power.
Item Power On Reset
Horz/Vert Horizontal Horizontal
Text Alignment Left Left
Character Pitch 8/8 8/8
Block Length Auto Auto
Mirror Printing Normal Normal
Proportional Spacing On On
Block Spacing Narrow Narrow
Auto Feed Long Long
Tape Length Auto Auto
Default Font Retained Sans-Serif
Insert/Overwrite Retained Insert
Contrast (32 levels) Retained Level 15
Density (5 levels) Retained Level 3
Sound Retained On
Language Retained English
Character Attributes
Fonts Default font Sans-Serif
Character Styles Normal Normal
Text Effects None None
Character Sizes:
(SIZE 9-119pt) Auto sizing Auto sizing
(LINE:FORMAT MENU) Canceled Canceled
cm/inch Retained cm
Printer head
Roller