Oakworks Powerline /Seychelle Treatment Table - Manual (Page 10)

7
DIReCTIONS fOR USe
PAPeR ROll hOlDeR USe
After the table is set-up,
locate the hole in the leg.
Using the supplied
screw & allen wrench,
secure the paper roll
holder bracket into
place. Repeat step for
the opposite side.
Locate the wooden
dowel & feed it thru
your paper roll. Place
the wooden dowel
notch in the hole locat-
ed in the paper roll
holder bracket.
To secure the wooden
dowel on the other
side, pull out the
paper roll holder
bracket slightly &
insert the notch into
the hole.
WAve bACKReST USe
TO RAISe The bACKReST
Lift the backrest to the desired height and
release. The Backrest support arm will lock in
the nearest slot in the side rail.
TO lOWeR The bACKReST
Lift the backrest slightly, lift and hold the
support arm out of the slot and lower the
backrest to the desired position.
TAble exTeNDeR
CAUTION
Do not put excessive weight or pressure on the table extender.
The Table Extender lengthens
the table for your tallest clients
and can improve access to your
patient.
Unfold the dowels and insert
into the outlets.
Locate the Accessory attach-
ment outlets.
CAUTION
Do not adjust the Backrest with a patient on the table.