beautypg.com

Portal light, Oakworks, Owner’s manual – Oakworks Portal Light User Manual

Page 2

background image

1. Have your client stand on the side of the chair and grasp the

chair frame just above the chest pad for support.

2. Have the client straddle the seat and place their far knee on the

knee pad.

3. Your client can then gradually begin to sit down. Once seated,

the client can put their other knee on the knee pad.

4. You can then make the adjustments to the face and arm rests

for proper client comfort and positioning.

1. Holding folded chair as shown, move the horizontal bar down

& insert the bar into locking arm. (photo 1 & 2)

2. Wrap Velcro

®

around inserted bar to insure locking. (photo 3)

3. Loosen face rest knobs and insert face rest platform arms into the

tubes on the back of the chest pad plate. (see photos 4 & 5)

SETTING UP YOUR MASSAGE CHAIR

page 1

OWNER’S MANUAL

PORTAL LIGHT

by

OAKWORKS

®

1) Move horizontal

bar down

HELPING YOUR CLIENT ONTO THE CHAIR

2. Adjustment for optimal client comfort

A.

Release the CamLocks and knobs on the face rest (photo 4 & 6)

B.

Have your client lean forward into the chest pad, letting

the chair support their weight.

C.

Ask your client to hold onto the face rest and to pull the

face rest toward them until their forehead rests comfortably

on the pad.

D.

Lock the CamLocks and tighten the knobs securely.

Do not over tighten the knobs - too much force may

cause

stripping.

FACE REST ADJUSTMENTS FOR OPTIMAL CLIENT COMFORT

1. General Adjustment Information

A.

Oakworks QuickLock™ face rest has virtually unlimited

positioning options. Vertical adjustment is achieved by

loosening the knobs, raising or lowering the face rest & then

tightening the knobs (photo 4 & 5). Angle adjustments are

achieved by unlocking the CamLocks & moving the face

rest. (figure 6 & 7)

B.

The locking cams on the face rest can be easily reversed

to the other side of the chair if desired. Loosen the knobs,

remove the face rest, reverse the rods & re-insert into the

tubes. Tighten the knobs. (photo 4 & 5)

2) Insert bar into arm

3) Wrap Velcro

®

to secure

6) CamLock™

7) Face rest positioning

4) Face rest knob

5) Vertical adjustments

Face rest

CamLocks

Arm rest

Arm rest

buckle & strap

Horizontal bar

& locking arm

Chest

Pad

Seat

Knee

Pads

Face rest

knobs

Personal item

storage shelf