Oakworks Boiance Float - Manual (Page 2)

USER MANUAL -
Boiance ™ Float Cont...
CARE, CLEANING & DISINFECTION
1. Store the Float flat and without significant weight on it. Excessive weight or storage at an angle can lead to
damage of the Float.
2. Do not allow the Float to experience freezing temperatures. The spheres are filled with water.
3. Do not immerse the Float in water or cleaning fluids. The fabric cover is removable and can be washed at low
temperatures without bleach. Air dry.
4. Use appropriate sterilized field materials to isolate the patient from the Float. This also minimizes cleaning and
disinfecting procedures. Use a 10% sodium hypochlorite (bleach) solution or Recommended Disinfectants on all surfaces.
Follow the directions on the disinfectant and wipe off excess.
Recommended Disinfectants
Protex, MadaCide, Accell TB, Virox ®
Note: Damage caused by unapproved substances will not be covered under the warranty.
SPECIFICATIONS
Dimensions (X Y Z) 9-1/2” x 9-1/2” x 2” (4cm x 4cm x 1cm)
Maximum Weight Rating 20 lbs. (9 kg)
Environmental Conditions
Temperature: 50°F (10°C) to 100°F (38°C)
Humidity: 20% to 60% RH
Atmospheric Pressure: 98 to 105 kPa
MAINTENANCE & SERVICE
• Periodically check the float for damage or non-uniformity
REPLACEMENT PARTS
• PN 71797: Boiance Float
X
Y
Z
Part No. MMINML0016 Rev. A
Phone: 717-235-6807 www.oakworks.com
923 East Wellspring Rd. New Freedom, PA 17349