Oakworks Attaching Bolster Arm Rest - Manual (Page 2)

Toll Free Phone: 800-558-8850 Phone: 717-235-6807
Toll Free FAX: 877-562-4787 FAX: 717-235-6798
www.oakworks.com
* U.S. Patent #5,177,823
1 -set of Recess
Fillers
1 - set of Recess
Filler Straps
1. Center the Recess Filler Straps placing velcro (hook) side down,
from left to right on the top of the table, making sure they are
parallel to each other. (Fig. 1)
2. Locate the velcro strips adhered to the table frame or attach strips
provided in this package. (Fig. 2) Attach one strap to the velcro
under the table. Press firmly on straps to securely fasten the velcro.
Repeat for the second strap.
Note: If you install the velcro on the inside of the table frame, you
should wait 24 hrs before use.
3) Each Recess Filler has a 2" wide strip of velcro (hook) sewn onto
the flat side. (Fig. 3) Attach the velcro (hook) on the Recess Filler to
the velcro (loop) on the Recess Filler Strap attached to the table.
(Fig. 4) Repeat for second Recess Filler.(Fig. 5)
CAU T I O N :
Your Advanta Recess Fillers are only meant to support a
client’s arms when they are lying supine or prone. They will
not support clients getting on or off the table or therapists
sitting on the egde of the table.
Fig. 1
Fig. 2 Fig. 2a
Fig. 3
Fig. 5
Instructions for Attachment:
Attaching Recess Fillers
to Your Advanta Table
O
AKWORKS
® , Inc.
923 East Wellspring Rd., New Freedom, PA 17349
Parts Included:
Fig. 4
Velcro on Bolsters
Velcro
on
Straps
Velcro
on
Recess
Fillers
Recess
Filler
Straps
2"
Recess Filler
Attached
8 - Velcro Strips
(Retro Fit Kit only)