NORAC 4467BC+4B - Manual (Page 4)

1
1
INTRODUCTION
This kit provides the necessary hydraulic and electrical parts that will allow your sprayer to provide
ACTIVE boom roll control. These parts integrate into your existing NORAC UC4+ Sprayer Height
Control System for minimal setup of this feature.
Every standard UC4+ Sprayer Height Control System ships with a Main Roll Sensor in the center of the
booms. With your roll control option installed, this sensor will now do double-duty and be able to
detect the pivot position of your booms. With this information, the UC4+ system can make enhanced
decisions about how to control your booms.
The extra hydraulic components add another dimension of control to your UC4+ Spray Height Control
System. These additions allow ACTIVE hydraulic control of the pivot position of the boom. Coupled
with the enhanced decision making, the Roll Control Option provides the greatest benefit for dynamic
boom control.
Please take the time to read this manual completely before attempting to install the system. A thorough
understanding of this manual will ensure that you receive the maximum benefit from the system.
YOUR INPUT CAN HELP MAKE US BETTER! If you find issues or have suggestions
regarding the parts list or the installation procedure, please don’t hesitate to contact us.