NORAC 4467BC+4B - Manual (Page 18)

15
3. Route hose H71 to the NORAC valve
block, following existing hoses.
4. Attach the 6FORXR-6MORT tee fittings
(F10) to the “P” and “T” ports on the
NORAC Valve block.
5. Attach hose (H71) to the 6FORXR-
6MORT tee fitting (F10) in the “P” port
on the NORAC valve block.
6. Tee hose H78 into the inlet on the
sprayer’s hydraulic in-line filter using a
6FORXR-6MORT tee fitting (F10)
(Figure 18).