NORAC UC4+BC+SM1 - Manual (Page 5)

2
2
GENERAL SYSTEM DESCRIPTION
Figure 1 depicts the general system layout of the UC4+ Spray Height Controller system.
Figure 1 – System Components and General Location
NOTICE:
Every effort has been made to ensure the
accuracy of the information contained in this
manual. All parts supplied are selected
specially to fit the sprayer to facilitate a
complete installation. However, NORAC
cannot guarantee all parts fit as intended due
to the variations of the sprayer by the
manufacturer. Please read this manual in
its entirety before attempting installation.
ATTENTION:
When installing the UC4+ System please be
aware that at a point in the installation your
sprayer booms will be inoperative until the
installation is complete. Any installation
procedure requiring boom movement will
need to be done first. Once the hydraulics
have been disconnected you must complete
the electrical installation before the booms
become operative.