NORAC UC4+BC+SM1 - Manual (Page 23)

20
TRACTOR
SIDE
SPRAYER
SIDE
Figure 21 – Cable Hitch Connections
Figure 22 – Cable Configurations: C1 – C4
7. Connect the sensor trunk cable (C01) to
C13 at the hitch.
8. Route C04 and C01 from the hitch to the
rear of the sprayer to the area where the
NORAC hydraulic valves are located.
9. Connect the 6-pin Tower on the UC4
valve cable (C03) to C04 at the rear of
the sprayer (Figure 22).