NORAC UC4+BC+NT3 - Manual (Page 20)

17
Figure 15: Mounting Plate and Valve
Installation
You must ensure no hydraulic
components will interfere with
any sprayer parts or be pulled
tight at any time.
7. Mount the valve using the bolts and
washers in the location shown in
Figure 16. The bolts should thread
into the valve block at least 3/8”. The
valve mounting holes are drilled and
tapped to 3/8” NC-1” deep.
Figure 16: Valve Mounting Location
Spray Nozzle
Valves
NORAC
Valve
Block
Mounting Plate