MUTEC MC-8.1 - Manual (Page 16)

\\\\\\\\\\\\
O P E RAT I O N O P E RAT I O N O P E RAT I O N
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 88 16
This setting enables to convert one input signal only (at input 1) to all four
outputs simultaneously. That means:
Input 1 → Outputs 1+ 2+3 + 4
Using this function, your MC-8 or MC-8.1 works as a typical 1→ 4 digital au-
dio signal distribution amplifier. The input signal can be between 32.0kHz
and 192.0kHz. Because the SRC function is not selected, your MC-8 or
MC-8.1 is only electrically converting the signals and no adjustments in the
»REFERENCE« menu can be carried out.
Conversion from one Input to all four Outputs
REFERENCE
88.2
48.0
44.1
32.0
192.0
96.0
176.4
IN3
IN2
IN1
IN4
WCLK
AES11
IN1- 4 → OUT1- 4
IN1 → OUT1/2
IN2 → OUT3/4
IN1 → OUT1- 4
SRC
MODE
This setting enables to convert two individual input signals (at inputs 1+ 2)
to two output pairs, one output pair for every input signal. That means:
Input 1 → Outputs 1+ 2
Input 2 → Outputs 3 + 4
Using this function, your MC-8 or MC-8.1 works as a typical digital audio
signal splitter for two independent signals. The signals can be based on
different sampling rates between 32.0kHz and 192.0kHz at the same time.
Because the SRC function is not selected, your MC-8 or MC-8.1 is only
electrically converting the signals and no adjustments in the »REFERENCE«
menu can be carried out.
Conversion from two Inputs to two Output pairs
REFERENCE
88.2
48.0
44.1
32.0
192.0
96.0
176.4
IN3
IN2
IN1
IN4
WCLK
AES11
IN1- 4 → OUT1- 4
IN1 → OUT1/2
IN2 → OUT3/4
IN1 → OUT1- 4
SRC
MODE
This setting enables to convert four individual input signals to the four
outputs available. That means:
Input 1 → Output 1
Input 2 → Output 2
Input 3 → Output 3
Input 4 → Output 4
The signals can be based on different sampling rates between 32.0kHz and
192.0kHz at the same time. Because the SRC function is not selected, your
MC-8 or MC-8.1 is only electrically converting the signals and no adjust-
ments in the »REFERENCE« menu can be carried out.
Conversion from four Inputs to four Outputs
REFERENCE
88.2
48.0
44.1
32.0
192.0
96.0
176.4
IN3
IN2
IN1
IN4
WCLK
AES11
IN1- 4 → OUT1- 4
IN1 → OUT1/2
IN2 → OUT3/4
IN1 → OUT1- 4
SRC
MODE
Function of Word Clock output when signal
converting only
When you are using your MC-8 or MC-8.1 as
electrical signal converter between AES/EBU
and AES/EBUid only (as described on this
page here), the Word Clock output on the
rear will not carry a reference clock signal.