Microtel MicroWin 2000 - Manual (Page 22)

MicroWIN 2000 Manual
Version 1.0
17
On this Setup MicroWIN Entries form (shown above), click on the button labeled New. This
tells MicroWIN 2000 that the user wishes to add an entry to the system. The form will change to
the Edit New Entry form (shown below).
Each entry must have a unique name. When trying to save an entry, if this entry’s name isn’t
unique, still ‘Default’ or is blank, MicroWIN 2000 will point out that the name will have to be
changed before saving the entry.
Each entry also contains a telephone number of its associated dialer so MicroWIN knows where
to call when trying to connect. If connecting locally, this phone number isn’t required.
Automatic Polling Information
MicroWIN 2000 has two main modes of operation: Manual Polling Mode and Automatic
Polling Mode. In Manual Polling Mode, all actions are done by a user. In Automatic Polling
Mode, entries can be enabled to automatically call its associated dialer and record both snapshot
and archive information from the S1000 Dialer. These settings are on this Edit Entry form
(shown above). See section Setting Up Dialer Entries, Page 9 for more details.
Automatically Acknowledge Dialer Alarms Within MicroWIN 2000
Also on this Edit Entry form are the settings to automatically acknowledge specific dialer
alarms. Whenever this entry connects to its associated dialer, this entry will automatically
acknowledge those alarms that have been marked as such. See section Setting Up Dialer
Entries, Page 9 for more details.