Microtel CellStat v.2.10 User Manual
Page 37
MICROTEL
CellStat
TM
35
Wireless logging of alarm events to Log-Stat™
web-based
application;
Tone or Pulse Dialing via the PSTN;
Special Sequences for Selection of Pulse/Tone,
Pause, Pagers, Auto-Acknowledging Alarms;
Cellular voice callout, cellular SMS Text Message.
Call Progress Detection
Dial Tone Detect
Busy
Detect
Ring Back/No Answer Detection
Answer Delay:
1-99 Rings (Call Back Acknowledge) via PSTN
1 – 3 rings when using the built-in cellular
interface.
A.2
Electrical
Input Power:
1.5 W @ +12 VDC via UL/CSA-approved
Plug in wall-transformer (supplied);
1 W @ 12 VDC when operating in low-power mode
12 V Solar Power Interface Compatible
On/Off
Switch
Internal Battery-charging circuit
AC Power/Battery Charging indicator
Resettable Internal Fuse
Optional: Surge Suppressor
Battery Operational:
Built-in, Rechargeable 6-AA cells NiCad Battery
Pack (provides 16 - 24 hours of backup power)
A.4 Environmental
Temperature:
20°F to 130°F operating
0°F to 130°F storage
Humidity:
0-95% RH, Noncondensing
EMI/RFI:
Meets FCC Part 15 Class A requirements for
radiated and conducted emissions
A.5 Enclosure
Options:
Panel Mount Chassis