Microtel CellStat v.2.10 - Manual (Page 27)

MICROTEL CellStat
TM
25
Controlling the local output relay
CellStat
TM
has a set of output contacts that may be controlled from a touch-tone phone.
These contacts may be used to turn ON or OFF external equipment, or as a signal input to
another device. Simply enter the following command during a phone call to or from the
dialer, via either the phone or cellular connection.
NOTE: de-energized state is open.
*06
Review local output configuration
**06 0/1/2 Configure/Control local output
Example- Command: **060
Response: The local output is closed.
Example- Command: **061
Response: The local output is open.
Example- Command: **062
Response: The local output is fault status