Microtel CellStat v.2.10 - Manual (Page 25)

MICROTEL CellStat
TM
23
CellStat™ can be configured to log all alarm events wirelessly to Microtel’s optional
web-based application, Log-Stat™. Upon a new alarm detection, CellStat
TM
can
wirelessly transmit an event log to Log-Stat™ via its built-in cellular capability before it
begins calling the phone numbers on its list. This capability provides the benefit of an
electronic record of each and every alarm event that occurs, accessible from any web
browser. Additional, more-descriptive email notifications can be sent from Log-Stat™,
and log data can be exported to an Excel spreadsheet.
Log-Stat™ event logs are only sent via the built-in cellular capability, not over the
telephone line.
In addition to event logging, when the dialer has Log-Stat™ capability enabled it
transmits a weekly health status report to Log-Stat™. This weekly health status report
will be forwarded to any email address(es) that are configured in Log-Stat™.
The dialer can be queried to check whether Log-Stat™ web-logging is enabled by
sending the following SMS text message from a mobile phone to CellStat
TM
’s cellular
phone number:
“log-stat” Query the current Log-Stat™ capability via SMS Text Message
Example- Command:
“log-stat”
Response: Enabled
NOTE: CellStat
TM
’s built-in cellular phone number is printed on a label on the left side
of the enclosure, near the antenna.
NOTE: Do not type the “” marks.
Log-Stat™ web-logging can only be turned ON by the factory. Call Microtel to order.
The following is a screen-shot of the Microtel Log-Stat™ web application:
Login at https://www.log-stat.com