MF Digital DIRECTOR CD/DVD Combo Series (Rev: 08/01/02) - Manual (Page 9)

DIRECTOR Series Operator’s Guide Document Revision: 0802
Page 8
The Best Place To Put The DIRECTOR
The best operating location for the DIRECTOR publishing system is in a
climate controlled area, free of dirt, dust, humidity, excessive heat, and
electronic or electromagnetic interference. Room temperature should be
between 65 and 75 degrees Fahrenheit, or between 18 and 23 degrees
Celsius. Place the DIRECTOR on a solid, steady work surface and allow
sufficient room for all incidental work materials. Provide at least six inches
of clearance on all sides of the unit for ventilation.
Safety Precautions
The system is shipped with a three-prong power connector and must be used
with a properly grounded AC receptacle. DO NOT try to defeat the third
“ground” prong. All computer peripherals must be properly grounded and the
DIRECTOR is no exception. The use of a power conditioner such as an
Uninterruptible Power Supply (UPS), or a surge protector is highly
recommended. At the very least you should consider connecting the PC
portion of the DIRECTOR to a UPS. The minimum required size is 500VA.
Repairs or alterations should only be attempted by authorized factory trained
technicians. MediaFORM reserves the right to void the warranty if
unauthorized service is performed.