beautypg.com

Page 84 – MF Digital DIRECTOR CD/DVD Combo Series (Rev: 08/01/02) User Manual

Page 85

background image

DIRECTOR Series Operator’s Guide

Document Revision: 0802

Page 84


The lower pane is the COMPLETED JOBS window that lists all the jobs
completed by the DIRECTOR. Information displayed for each job includes:
its assigned JobID, the total number of requested CDs, the number of
successful CDs produced, the number of failed CDs produced and the time
each of the jobs was completed.

The Production Process

During production the blank discs will be loaded one at a time from the input
spindle into the recorders and/or printer. Upon successful completion the
discs will be unloaded onto the output spindle. This process will continue
until the job is complete, and the DIRECTOR will then advance to produce
the next job in the queue according to its priority.

However, if the 1

st

input spindle empties before the job is complete the

DIRECTOR will then go to the 2

nd

input spindle. If the 2

nd

input spindle is

empty the screen will now display:





To continue producing the job, place additional blank discs onto the 1

st

input

spindle and click the Yes button. To stop the job click the No button and the
remainder of the job will be aborted. The DIRECTOR will then advance to
produce the next job in the queue according to its priority.

Any discs dropped on the reject/centering spike have failed to record
properly and should not be used. Be sure to remove rejected discs
periodically during operation, if the need arises.

Note: