MF Digital SCRIBE EC PC-Based Series User Manual
Page 8

SCRIBE EC
Operator’s Guide
Document Revision: 11/4/04
Page 7
Minimum System Requirements
Print Station & 1-Drive Models – Minimum System Requirements:
• Minimum Pentium® III or compatible personal computer @ 800 MHz or faster
• Windows 2000 Professional or Windows XP Professional Service Pack 1.0a or higher
• 512 MB RAM
• 7200 RPM ATA-100 hard drive with 850 MB for CD-R or 5GB (NTFS) for DVD-R of free
hard disk space - fully defragmented
• Monitor: 800 x 600 display, 16-bit color recommended
• Two button mouse
• High quality recordable CD-Rs / DVD-Rs
• One free PCI slot for 1 Drive System, Not required for Print Station Only.
• One external COM Port (COM1 or COM2) *Two external COM ports are needed if using
MF DIGITAL Spectrum2 or Prism Plus (COM1 and COM2).
• WinASPI driver layer (Included)
• IEEE-1394 B Adapter (Included)
•
Appropriate IEEE-1284 printer cable if attached
•
* A USB to Serial Converter can be used if no COM port is available.
2-Drive & 4-Drive Models – Minimum System Requirements:
• Minimum Pentium® 4 or compatible personal computer @ 2 GHz or faster
• Windows 2000 Professional or Windows XP Professional Service Pack 1.0a or higher
• 1 GB RAM (Asynchronous Operation)
• 7200 RPM ATA-100 hard drive with 850 MB for CD-R or 5GB (NTFS) for DVD-R of free
hard disk space - fully defragmented
• Monitor: 800 x 600 display, 16-bit color recommended
• Two button mouse
• High quality recordable CD-Rs / DVD-Rs
• One free PCI slot
• One external COM Port (COM1 or COM2) *Two external COM ports are needed if using
MF DIGITAL Spectrum2 or Prism Plus (COM1 and COM2).
• WinASPI driver layer (Included)
• IEEE-1394 B Adapters (Included)
• Appropriate IEEE 1284 printer cable if attached
•
* A USB to Serial Converter can be used if no COM port is available.