MF Digital SCRIBE EC PC-Based Series - Manual (Page 77)

SCRIBE EC Operator’s Guide
Document Revision: 11/4/04
Page 76
• Select the appropriate file and click the Open button. Leave the field
blank if no label is to be printed.
Making Copies (Relay Mode)
The quickest and simplest way of duplicating one or more discs is to use
the SCRIBE EC’s Relay Mode copying feature. Relay Mode functions by
placing the number of blank discs to be written to, into the input bin;
followed by the original CD to be copied (master disc), placed on top. The
SCRIBE EC then loads the master disc into the recorder, creates an image
of it on the internal hard disk drive, and unloads the master disc onto the
output spindle. The SCRIBE EC then continues to load and copy to as
many blank discs as are in the input bin. Multiple masters can also be
mixed with blank discs in the input bin, so numerous jobs can automatically
be performed in sequence. This can be done to a maximum of 75 discs
(masters and blanks).
Quantity (required)
The Quantity field is used to specify the number of discs to be recorded or
printed as part of the current job.
• Click the Quantity field and enter the number of discs to be recorded or
printed.
Priority (required)
The Priority field is used to specify the production priority assigned to the
current job. Choose from lowest, low, normal, high, or highest.
• Click the Priority drop down menu and choose a priority.
Note: If the Archive option is selected, the quantity should be zero.