MF Digital SCRIBE EC PC-Based Series - Manual (Page 10)

SCRIBE EC Operator’s Guide
Document Revision: 11/4/04
Page 9
Packing Materials
Please retain the original box and packaging in the event that the unit
requires future servicing. This will help to reduce the possibility of damage
occurring in transit. In the event that the system is shipped back to MF
DIGITAL without the original box and packaging, customers will be
charged for new box and packaging.
The Best Place To Put The SCRIBE EC
The best operating location for the SCRIBE EC duplication system is in a
climate controlled area, free of dirt, dust, humidity, excessive heat, and
electronic or electromagnetic interference. Room temperature should be
between 65 and 75 degrees Fahrenheit, or between 18 and 23 degrees
Celsius. Place the SCRIBE EC on a solid, steady work surface and allow
sufficient room for all incidental work materials. Provide at least six inches
of clearance on all sides of the unit for ventilation.
Safety Precautions
The system is shipped with a three-prong power connector and must be
used with a properly grounded AC receptacle. DO NOT try to defeat the
third “ground” prong. All computer peripherals must be properly grounded
and the SCRIBE EC is no exception. The use of a power conditioner such
as an Uninterruptible Power Supply (UPS), or a surge protector is highly
recommended. The minimum required size is 400VA.
Repairs or alterations should only be attempted by authorized factory
trained technicians. MF DIGITAL reserves the right to void the warranty if
unauthorized service is performed.