MF Digital SCRIBE EC PC-Based Series - Manual (Page 79)

SCRIBE EC Operator’s Guide
Document Revision: 11/4/04
Page 78
Media type (required)
Check the type of media that corresponds to the media being used, CD-R or
DVD-R.
Jobs in progress
The Jobs in progress area displays the job currently running on the
SCRIBE EC. This area displays the: job name, type of operation, quantity,
number done, number rejected, status, and progress. The three buttons
along the right side of the Jobs in progress area are abort, pause, and status.
The abort button deletes jobs currently running. The pause button pauses
the current job, and the status button displays the status of the current job.
Finished jobs
The Finished jobs area displays the: job name, type of operation, quantity,
number done, number rejected, and the status. The two buttons to the right
of the Finished jobs area are the Remove and Details buttons.
• Clicking Remove will clear selected jobs from the Finished jobs area.
• Clicking Details will display the job information of the selected job in
the Finished jobs area, as seen below.
Recording Speed (Required)
The Speed pull-down allows you to set the recording speed as determined
by the capabilities of speed rating of the media being used with the
SCRIBE EC.
• Click the Speed pull down and select the desired recording speed.