MF Digital SCRIBE EC PC-Based Series User Manual
Page 67

SCRIBE EC
Operator’s Guide
Document Revision: 11/4/04
Page 66
• Check the option box to enable the production option needed for your
job and click “Next”:
Operations and Options:
Copy
When checked the CDs in the submitted job will be
recorded using the disc image file selected in the
IMAGE field.
Verify
When checked the CDs in the submitted job will
automatically be compared against the source files
after recording is completed.
When checked the CDs will be printed with the disc
label selected in the LABEL FILE field.
Test
When checked the CDs in the submitted job will
not be recorded.
Archive
When checked an existing CD is saved to the hard
drive as a physical image file for later recording.
This option is used for duplicating existing CDs
(see page 81).
Relay Mode
When checked an image of the top most disc
(master disc) is created on the hard drive and used
to make copies.
Speed
The recording speed pull-down allows you to set
the recording speed as determined by the
capabilities of the recorders installed in the SCRIBE
EC.
Print first
When checked, SCRIBE EC will print the disc
before copying.